- 貿易額
- $4480億2024
- 全貿易に占める割合
- 2.0%96件中10位
- 輸出国数
- 220か国
- 輸入国数
- 224か国
年別の世界貿易額(1995年~2024年)
名目米ドル建てで、物価調整は行っていません。
主な輸出国
2024年。各国のこのカテゴリーの貿易に占める割合を併記しています。
主要輸入国
2024年。各国のこのカテゴリーの貿易に占める割合を併記しています。
最大の貿易の流れ
2024年における国から国への流れです。
| 輸出元 | 輸入国 | 金額 | 割合 | 2000年以降 |
|---|---|---|---|---|
| インドネシア | 中国 | $155億 | 3.4% | |
| カナダ | アメリカ合衆国 | $76.6億 | 1.7% | |
| 中国 | ベトナム | $72.7億 | 1.6% | |
| アメリカ合衆国 | メキシコ | $70.2億 | 1.6% | |
| 中国 | 韓国 | $56.1億 | 1.3% | |
| ブラジル | アメリカ合衆国 | $53.4億 | 1.2% | |
| アメリカ合衆国 | カナダ | $42.1億 | 0.9% | |
| 日本 | 韓国 | $41.1億 | 0.9% | |
| 日本 | タイ | $38.2億 | 0.9% | |
| 中国 | インドネシア | $35.7億 | 0.8% | |
| 中国 | タイ | $35.2億 | 0.8% | |
| ベルギー | フランス | $33.2億 | 0.7% | |
| ベルギー | ドイツ | $33.1億 | 0.7% | |
| メキシコ | アメリカ合衆国 | $32.5億 | 0.7% | |
| ドイツ | ポーランド | $31.5億 | 0.7% | |
| 中国 | アラブ首長国連邦 | $30.9億 | 0.7% | |
| 中国 | トルコ | $30.6億 | 0.7% | |
| フランス | ドイツ | $30.4億 | 0.7% | |
| 日本 | 中国 | $29.7億 | 0.7% | |
| 韓国 | 日本 | $29.6億 | 0.7% |
主要品目
この類に含まれる、2024年の世界貿易額順のHS6桁コードです。
| コード | 品目 | 金額 | 割合 | 2000年以降 |
|---|---|---|---|---|
| 720449 | Ferrous waste and scrap: n.e.s. in heading no. 7204 | $286億 | 6.4% | |
| 721049 | Iron or non-alloy steel: flat-rolled, width 600mm or more, (not corrugated), plated or coated with zinc (not electrolytically) | $262億 | 5.8% | |
| 720824 | Iron or non-alloy steel: in coils, flat-rolled, width 600mm or more, hot-rolled, less than 3mm thick, excluding minimum yield point of 275MPa | $233億 | 5.2% | |
| 720260 | Ferro-alloys: ferro-nickel | $159億 | 3.6% | |
| 720842 | Iron or non-alloy steel: not in coils, flat-rolled, hot-rolled, thickness exceeding 10mm, excluding minimum yield point of 355MPa | $144億 | 3.2% | |
| 720712 | Iron or non-alloy steel: semi-finished products of iron or non-alloy steel: containing by weight less than 0.25% of carbon, of rectangular (other than square) cross-section | $137億 | 3.1% | |
| 721070 | Iron or non-alloy steel: flat-rolled, width 600mm or more, painted, varnished or coated with plastics | $134億 | 3.0% | |
| 721420 | Iron or non-alloy steel: bars and rods, hot-rolled, hot-drawn or hot-extruded, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling | $121億 | 2.7% | |
| 722590 | Steel, alloy: flat-rolled, width 600mm or more, n.e.s. in heading no. 7225 | $121億 | 2.7% | |
| 720823 | Iron or non-alloy steel: in coils, flat-rolled, width 600mm or more, hot-rolled, thickness of 3mm or more but less than 4.75mm, other than minimum yield point of 355MPa | $118億 | 2.6% |
割合は、このカテゴリーの貿易全体に占める比率です。 線は2000年からの各数値の推移で、各自の最高値を基準に描いています。線は年ごとの形を、数値は大きさを表します。
エクスプローラーで見る